• Home > Car ECU Chip Tuning > BDM Probe 22 in 1 KTAG KESS KTM Dimsport Full Set BDM Probe Adapters For Denso Marelli Bosch Siemens
Click to enlarge
Click to enlargeClick to enlarge
Qty:

BDM Probe 22 in 1 KTAG KESS KTM Dimsport Full Set BDM Probe Adapters For Denso Marelli Bosch Siemens

by Car ECU Chip Tuning  SKU: Gsunlight00003
Price: $107.99  $77.99
Save: 28% off
History: 37 sold
Model:
  • Gsunlight00003
  • Weight:
  • 0.9 KG
  • Availability: In stock
    Payment:
    Best Deals
    Clearance Sale
    Related Items
    Product Description
    Customers' Reviews
    FAQ

     

    BDM Probe Set is Full BDM adapters for KTAG/KESS/KTM/Trasdata chiptuning tool. 22 in 1  KTAG KESS KTM Dimsport BDM Probe Adapters Full Set For Denso Marelli Bosch Siemens. KTAG KESS KTM Dimsport BDM Probe Adapters Full Set Can work with Stainless Steel BDM Frame Table.

     

     

    BDM Probe 22 in 1 t KTAG KESS KTM Dimsport BDM Probe Adapters Full Set For Denso Marelli Bosch Siemens

    Full BDM adapters for KTAG/KESS/KTM/Trasdata chiptuning tool BDM Probe Adapters Full Set For KTAG KESS KTM Dimsport All BDM Probe Set

    BDM Probe Set comes with 22 BDM adapters.

    Kindly notice: BDM Probe Adapters Full Set can only work with Stainless Steel BDM Frame Table.

     

    Stainless Steel BDM Frame With Plexiglass BDM Programming Positioning Frame Table Work for KESS V2, Ktag, Fgtech

    Stainless Steel BDM Frame

     

    BDM Probe Adapters Full Set Features:

    Adapter width: ~60mm width for original BDM Probe, not for low quality plastic with 40mm width.
    Adapter thickness: 2mm
    Adapter colour: Green

    BDM Probe Adapters Full Set Package includes:

    1 14AM00T01M Bosch
    2 14AM00T02M Delphi DCM
    3 14AM00T03M Bootloader ST10xx
    4 14P600KT04 Infineon Tricore EDC/MED17
    5 14AM00T05M Marelli MPC55xx JTAG
    6 14AM00T06M Delphi MPC55xx JTAG
    7 14AM00T07M Denso CN1 Boot
    8 14AM00T08M Denso CN2 Boot
    9 14AM00T09M Denso CN3 Boot
    10 14AM00T10M Denso CN1 AUD
    11 14AM00T11M Denso CN2 AUD
    12 14AM00T00M Delphi DCI
    13 14AM00TBAS Base Adapter 1.27
    14 14AM00T14M NexusEFI T6 Lotus
    15 14AM00TB02 Magneti Marelli BDM insert
    16 14AM00TB01 Siemens BDM insert
    17 14AM00TB03 EDC7 BDM insert
    18 14AM00T18M Magneti Marelli MPC/SPC56xx
    19 14AM00T13M Nexus MPC5xx TRW ECU
    20 VAG 1.6tdi - Siemens-Continental PCR2.1
    21 14AM00T15M Toyota NEC76F-20
    22 14AM00T16M Toyota NEC76F-26

    How to use BDM Probe Adapter Set with KTAG/KESS/KTM100/Dimsport?

    1.Open the ECU
      At least one part of the casing (top or bottom) needs to be removed
      Refer to other sources (Internet) to get information on which part needs removing on your ECU

     2. Locate the ECU BDM connector
        usually a set of 10 – 12 pads in two rows (depending on the ECU)
        pads may be 2.54 mm or 1.27 mm apart (depending on the ECU)
        rows may be 2.54 mm or 5.08 mm apart (depending on the ECU)
        if the ECU BDM connector can not be located, chances are that the BDM pads are scattered

    all over the ECU PCB in which case you can not use the adapter directly – nevertheless it is

    possible to manually route the adapter BDM signals to the ECU BDM pads (only for advanced users)

     3.  Locate the ECU BDM pin 1 position
        pin 1 is usually not clearly marked on the ECU BDM pin out
        on an ECU with the standard Motorola BDM pin out pins 3 and 5 are connected to ground –this can be checked either visually or using a multimeter tool
        refer to other sources (Internet) to get more information on the pin 1 position for your ECU

     4. Place the desired adapter in the frame saddle
        make sure the pogo pins are facing out
        lift the saddle so that the ECU can be slided under the frame adapter saddle

     5. Place the ECU on the frame
        inspect the adapter for pogo pin 1 location which is clearly marked
        rotate the ECU on the frame so that the adapter pogo pin 1 and ECU BDM pin 1 match
        make sure ECU is firmly sitting on the frame
        double check the ECU position

     6. Connect the multiplexer board and adapter
        at this point multiplexer board should be connected to the adapter via MUX connector
        this will allow LEDs on the adapter to illuminate the area of interest (where the pogo pins need to touch the ECU BDM pads)
        do not connect the tool yet

     7. Connect the external power (+12 V) to the multiplexer
        multiplexer external power is used to power the LEDs on the adapter allowing easier
        positioning of the adapter pogo pins on the ECU BDM pads
        red LED on multiplexer board will light up when external power (+12 V) is present
        at this point the white LEDs on the adapter should also light up
        do not connect the tool yet

     8. Fine tune the ECU position
        lower the frame adapter saddle to almost touch the ECU BDM pads
        each adapter pogo pin needs to sit on a separate ECU BDM pad
        if pogo pins do not sit on the pads you may be using the wrong adapter – do not use the adapter in this case!

     9. Lower the frame adapter saddle
        each adapter pogo pin should sit on one ECU BDM pad
        minimum down force should be applied when making the interconnection between the adapter and ECU

     10. Double check the adapter pogo pin and ECU BDM pad interconnection
           in order not to damage the ECU and/or tool make sure that the steps above have been
           performed correctly

     11. Connect the tool to the multiplexer board
          only connect one tool at any given moment to the multiplexer
          make sure to use the correct 10-pin IDC connector (FGTECH, XPROG, BDM100&KTAG)

    for interfacing the tool used:
    ○ use provided 10-pin to 10-pin cable with FGTECH or BDM100 tools
    ○ use provided 10-pin to 16-pin cable with XPROG tool
    ○ use manufacturer 10-pin to 25-pin cable with KTAG tool

        do not connect the tool to the 10-pin IDC connector labeled MUX
        do not power up the tool yet

     12. For Bosch adapter only

        Bosch ECUs need to have ECU power supplied on the pogo pins (2 and 9)
        some tools provide dedicated ECU power (BDM100, KTAG) while others do not

    (XPROG, FGTECH)

        Bosch adapter can be used in both cases, providing that the jumper is properly placed on

    the 3-pin header (found on the adapter)

        place the jumper on the adapter on the 3-pin header to the correct position:

    ○ place jumper over left and central pins when using XPROG and FGTECH tools – this will use +12 V power delivered from the multiplexer board (external power) for powering the ECU

    ○ place jumper over right and central pins when using BDM100 or KTAG tools – this will use

    +12 V power delivered by the tool for powering the ECU

     13. For Siemens, Delphi and Marelli adapters only

        Siemens, Delphi and Marelli do not provide ECU power on the pogo pins
        in order to power the ECU +12 V and ground signals needs to be connected to the ECU separately (usually over the ECU interfacing connector)
        in this case ECU power can be taken from multiplexer board connectors J2 (+12 V) and J3 (ground), otherwise provide the +12 V ECU power from additional source
        refer to other sources (Internet) to get more information on the location of the +12 V and ground pin location for your ECU

    14. Connect the tool to the PC (or power up the tool)

        perform software installation as described by the tool manufacturer if not done already
        at this point the multiplexer, adapter and the ECU should be properly interconnected with

    BDM signals and power lines

    ○ multiplexer red LED should be lit up

    ○ adapter white LEDs should be lit up

    ○ ECU power (+12 V) should be present

        connect the tool to the PC (usually done over USB or serial connection)

     15. Perform BDM operation(s)

        start up the software package to operate the tool
        perform desired BDM operation(s)Note: The user manual is used for reference; in fact, it depends. Try on your own risk.

     

     

     

     

    Gsunlight.com-- China OBD2 Tool, Automotive Diagnostic Tools, Car Key Programmer, OBD2 ECU chip tuning tool Center.

    Contact information:


    Website: www.gsunlight.com
    Email:
    gsunlight@outlook.com
    Skype: gsunlight@outlook.com
    Whatsapp: +86-13691674080


     

     

     

     

     

     

    Gsunlight.com-- China OBD2 Tool, Automotive Diagnostic Tools, Car Key Programmer, OBD2 ECU chip tuning tool Center.

    Contact information:

     

    Website: www.gsunlight.com

     

    Sales 01                 Sales 02                         Engineer            

    Email: gsunlight@outlook.com                  Email: happysunlight2014@outlook.com       Email: mickaltech@gmail.com

    Skype: gsunlight@outlook.com                 Skype: fionalyy88@gmail.com                          Whatsapp: +86-14776192853

    Whatsapp: +86-13691674080                   Whatsapp: +86-13538280570

     



    Copyright (c) 2018 gsunlight.